MTS 02 Failure and Damage Mechanisms of Pressurized Equipment in General
MTS 03: Failure and Damage Mechanisms of Pressurized Equipment in Refining/
Petrochemical Industries (with reference to API 571)
Deeper understanding of the failure and damage mechanisms through case studies, comprehensive presentation of metallurgical and scientific evidence with explanation of the fundamentals behind the respective mechanisms. Introduction of the concepts of metallurgical failure analysis, which would help participants on diagnosing failure and damage mechanisms.
ASME and API codes are commonly referred to for the design, fabrication, inspection, and testing of pressurized equipment. Failure and damage mechanisms during service are however generally not addressed in these codes. Understanding and determining the causes of failure or degradation is essential when conducting a general inspection, fitness-for-service (FFS) assessment or risk-based-inspection (RBI) of an equipment or plant.
As determination of the cause of failures/degradation can be quite complex due to widely varying material/environmental condition interactions in most plants, API Recommended Practice 571 was published to provide information and general guidelines to assist inspection personnel and engineers in identifying likely causes of damage, as well as to introduce the concepts of service-induced deterioration and failure modes.
While API 571 does serve its purpose well, this training course aims to provide participants with deeper understanding of the failure/damage mechanisms through case studies, comprehensive presentation of metallurgical/scientific evidence and explanation of the fundamentals behind the respective mechanisms. The course also introduces the concepts of metallurgical failure analysis, which would help participants on diagnosing failure and damage mechanisms.
The training provides participants with:
• Basic concepts in metallurgy
• Overview of failure analysis and the techniques of diagnosing failure modes and damage mechanisms
• Understanding of general damage mechanisms for all industries
• Understanding of damage mechanisms in refining/petrochemical industries (for 3rd day course). Integration of theoretical and practical knowledge through case studies.
• Ability to recognize and evaluate different failure/damage mechanisms and their implications on service life.
WHO SHOULD ATTEND
The course is designed for Engineers (AEs, CPs, etc), Inspectors, Consultants, Adjusters, Maintenance and Plant Operators, and Safety and Quality Assurance Personnel. It is essential for those whose work involve safety, inspection, maintenance, trouble-shooting, plant operations and prevention of failures.
Day 1 (Part I – MTS 02)
- Introduction and Course Objectives
- Basic Concepts of Metallurgy
- Overview of Failure Analysis and Diagnostic Techniques
- Mechanical and Metallurgical Failure Mechanisms
Day 2 (Part I – MTS 02)
- Uniform or Localized Loss of Thickness
- High Temperature Corrosion
- Environmental-Assisted Cracking
Day 3 (Part Il– Refer to MTS03)
- Refining/Petrochemical Industries
- Uniform or Localized of Thickness
- Environmental-Assisted Cracking
- Other Mechanisms
ABOUT THE TRAINERS
Er. LIAM KOK CHYE
BEng (Hons) M.Eng, P.Eng, Sr M.I.E.S. NACE
Er. Liam, has more than 30 years of consulting experience in failure analysis, forensic engineering and condition assessment for a wide spectrum of industries. He has also served as expert witness for many litigation and insurance cases. Through his failure analysis work, he has encountered more than 90% of the damage mechanisms covered in API 571, which would be shared through case studies in the course.
Ms JUDY GOH
BEng MSE (Hons), API 510, API 580
Judy has 10 years of relevant experience consultancy experience in forensic engineering, failure investigation, materials, corrosion engineering and condition assessment work. The industries covered include utilities/power plants, oil and gas, chemicals, petrochemical, pharmaceutical, marine and offshore.
To register for the course, please complete this form and email to email@example.com
MTS 02_Failure and Damage Mechanisms of Pressurized Equipment in General Part I (2-day)
MTS 03_ Failure and Damage Mechanisms of Pressurized Equipment in Refining/Petrochemical Industries Part II (1-day)
MTS 02: 20th to 21st May 2020 (Wed & Thu)
MTS 03: 22nd May 2020 (Fri)
MTS 02: 22nd April 2020
MTS 03: 24th April 2020
Venue: 3 Seletar Aerospace Link, Singapore 797550
Time: 8.30 am to 5.30 pm each day
MTS 02: SGD 1,200.00 per person (exclude GST)
MTS 03: SGD 600.00 per person (exclude GST)
MTS 02: 10% Discount! Registration must reach us by 08th April 2020
MTS 03: 10% Discount! Registration must reach us by 08th April 2020
Group Discount: 10% Discount per person (exclude GST), minimum 3 participants from the same company
Select: MTS 02 only / MTS 02 & MTS 03 / MTS 03 only
Registration form and course fees are to reach MATCOR before the closing date.
Registration will only be confirmed upon full payment.
All cheques should be made payable to “MATCOR Technology & Services Pte Ltd”.
Overseas participants are to pay in Singapore Dollar bank draft ONLY. If payment is by TELEGRAPHIC TRANSFER, please add S$70.00 for administrative and bank charges
For further information, please contact Ms. Irene Lim or Ms. Lynn Tan at +6567788285 or email us at firstname.lastname@example.org
Cancellation & Refund:
• Any cancellation made after closing date –no refund, but delegate substitution is allowed.
• Any cancellation made before closing date –full refund.
• MATCOR reserves the right to cancel or reschedule the course, only if deemed necessary.